Stereomour manual corrections

[Doc B.]

This is for manuals before the 6-30-11 version:

On page 45, under 6,3V heater wiring:

Where it says "Connect the red wire to power transformer terminal 12 at one end and pin B5 of the nine pin socket. Solder all four terminals."

it should read "Connect the red wire to power transformer terminal 15 at one end and pin B5 of the nine pin socket. Solder all four terminals."

The photo is correct.

For manuals before the 10-21-11 version

On page 32 it should mention that the two larger holes in the four pin socket should go near the hum balance potentiometer

On page 61 the first paragraph should say strip 1/2" of the cover off, not 1-1/2".

On page 67 "Attach the other from 2U to the “K” pad  on the side of the power supply PC board nearest the C socket." should read:
Attach the other from 20U to the “K” pad  on the side of the power supply PC board nearest the C socket.  

[Paul Joppa]

Also, where it says on p.45 "6,3V heater wiring", that should be 12.6v heater wiring.

[smithanh]

The CD that came with my Stereomour manual can't be read by my computer.  Is there a PDF download available?
Thanks