Stereomour with preamp?

[jrebman]

I'm wondering if anybody has used their stereomour with a preamp with gain -- such as the FP III+.

I suspect that if one were going to do this that it may be better to go to a lower gain driver tube, and the ECC99 comes to mind as a possible sub for the 12at7 (with some wiring and operating point changes.)

Anybody try this or have any thoughts?

Thanks,

Jim

[howardnair]

hi jim--i have used my stereomour with my basic foreplay III-all seemed well--at the moment i am using a scott 130[upgraded] as a preamp and phono in front  of my stereomour-i have used both as just a phono pre and fully engaged pre so to speak-i went back and forth and i prefer cd/tuner phono and tape through the scott-i have done this with my super upgraded pas 2 also with good results-and a sony 2000f solid state preamp-i can not pinpoint exactly why i prefer this-simply put -i like what i hear-maybe i just like all the switches and knobs- i looked at the specs on the 130 - there are no gain specifics-but its uses 12ax7's 5 of them for phono and line stage and 2 12au7's in  the record/tape playback-section-i realize that this is contrary to well!!- quite a few things!!!!! now that it has come up i will probably disconnect reconnect-hook up the foreplay etc-try things with and without-all in the fun of hobby and obsession

[Paul Joppa]

The ECC99 has more gain than a 12AU7 (mu of 22 vs. 17).

[jrebman]

Paul,

Understood, but the stereomour uses a 12at7, remember?   Not talking about c hanging the preamp here.  Also, the ecc99 looks more capable of driving a 2a3 than a 12au7.

Again, just kind of thinking out loud here -- I'm not at all committed to this yet.

-- Jim